Setting up a Brick Paver Walkway or Calcium Silicate Brick

The usage of Bricks or Pavers to develop a walkway or patio complements a home in a method that is unmatched. In addition, setting up a Brick or Paver pathway does not always require a pro.

The key to installing a Brick or Paver Walkway is to very first appropriately prepare the location where the bricks/pavers are to be set up. The location should be dug out a minimum of a foot down, removing all topsoil and clay soil. In addition, string lines ought to be strung on each side of the sidewalk. The string lines suggest the completed height of the sidewalk.
When the area has been dug down, 3/4" gravel stone ought to be laid in and tamped down firmly. Then 2" of sand, or stone dust must be spread over the gravel. Again the sand/stone dust should be tamped down. Stone dust is chosen. The height between the tamped down sand and the stringline should equal the thickness of the brick or paver.

Now that you have a steady base, position a 1" pipeline or journal board the length of the sidewalk on either side of the sidewalk. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will develop a level surface location to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up a work on both sides of the ready location. These strips will serve as your pathway border and help to preserve the stability and shape of the sidewalk. You can get these plastic strip borders at a lot of home enhancement stores. The strips ought to be anchored down with 12" galvinized nails. You ought to sink these nails into the ground and through the strips every foot.

The secret to laying the bricks/pavers is to make sure that they interlock with each other. Always stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again assist keep the stability of the pathway.

Undoubtedly bricks/pavers will need to be cut or divided when building the sidewalk. To really cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the spot where you desire to break the brick. If your sidewalk has curves you will need to buy/rent a wetsaw.

After installing the get more info bricks, develop the outdoors edges with additional sand, and then shovel in the topsoil and pack down firmly.
Spread stone dust over the brand-new pathway and sweep into the fractures. Repeat this procedure a number of times to make sure the fractures are totally filled. This will complete the interlocking of the bricks and help to eliminate any weed development. Just add yard seed to the outdoors edges and you need to have a stunning entryway to your house within a couple of weeks.


In addition, setting up a Brick or Paver pathway does not necessarily require a pro. The key to installing a Brick or Paver Walkway is to very first effectively prepare the location where the bricks/pavers are to be set up. Now that you have a stable base, put a 1" pipe or ledger board the length of the walkway on either side of the walkway. These strips will act as your walkway border and help to maintain the stability and shape of more info the pathway. Undoubtedly bricks/pavers will require to be cut or split when building the sidewalk.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Setting up a Brick Paver Walkway or Calcium Silicate Brick”

Leave a Reply

Gravatar